4 Best PoE Splitters in 2026
We compared PoE splitters by real power delivery and pass-through, since one listing splits PoE into both 12V DC and a downstream PoE output.

New to Amazon Prime?
Get fast, free shipping on every pick in this guide, plus Prime Video and exclusive deals.
Try Prime Free




At a Glance

IPCamPower Gigabit POE to 12V DC Converter with POE Pass Through
โ See why we picked itA PoE splitter converts Power over Ethernet into standard DC voltage, letting you power a non-PoE device like a Wi-Fi access point or an IR illuminator from the same Ethernet cable feeding a nearby PoE camera, without running a separate power line.
We compared this lineup on real power delivery, safety protections, and pass-through capability, since one listing specifically splits incoming PoE into both a 12V DC output and a separate downstream PoE output, letting you power two devices from a single cable run.
5 Criteria to Look For Before Buying a PoE Splitter
Key buying criteria so you get the right fit the first time.
A PoE Splitter With Pass-Through Capability Solves a Genuinely Different Problem Than a Single-Output Splitter
The IPCamPower pick specifically splits incoming PoE into both a 12V DC output and a separate downstream PoE output, letting you power a camera and a separate 12V accessory like an IR illuminator from one cable, a fundamentally different capability than the single-output splitters in this comparison that only convert to DC without any pass-through. This matters significantly if your installation needs to power two separate devices near each other from one cable run, and matters less if you only have one non-PoE device to power. Check whether a splitter specifically offers pass-through or dual-output capability if you need to power more than one device from a single PoE source.
Comprehensive Electrical Protection Specifications Matter Even on an Inexpensive Splitter
The SICSOLINK pick specifically names overcurrent, short-circuit, overvoltage, and overpower protection built into its chip, a genuinely comprehensive safety feature set despite being the lowest-priced pick in this comparison, showing that low price doesn't have to mean reduced electrical safety. This matters if you're powering valuable connected equipment where an electrical fault could cause real damage, and matters less if you're powering an inexpensive, easily replaceable device. Check a splitter's specifically named protection features rather than assuming price alone indicates safety quality.
A Specifically Named Device Compatibility List Removes Real Guesswork Before Connecting Your Equipment
The PoE Texas pick specifically names compatible devices including Arduino, Foscam, Wansview, Airsight, EasyN, Escam, Q-See, and Apexis, a genuinely specific compatibility disclosure that helps confirm your exact device will work before purchase, rather than a generic 'works with IP cameras' claim. This matters if you own one of these specifically named devices and want confidence before buying, and matters less if your device isn't on any listed compatibility list, where you'd need to verify voltage and connector specifications independently regardless. Check for a specifically named compatibility list matching your exact device model if you want that added purchase confidence.
Selectable Voltage Output Provides Flexibility for Buyers Who Aren't Certain Which Voltage Their Device Needs
The LINOVISION pick specifically offers selectable DC12V or DC24V output, letting the same physical splitter serve devices with different voltage requirements, unlike the fixed-12V-only picks in this comparison that only work with 12V devices. This matters if you're deploying the splitter across multiple device types with different voltage needs, or if you're not entirely certain of your specific device's exact voltage requirement, and matters less if you know you specifically need 12V and nothing else. Check whether a splitter offers selectable voltage output if you need flexibility across multiple device types or voltage uncertainty.
Metal Housing With DIN-Rail Mounting Serves Industrial Installation Contexts Differently Than a Compact Plastic Splitter
The LINOVISION pick's full metal housing with DIN-rail mounting compatibility targets industrial control cabinet installations, a different physical deployment context than the compact plastic-housed splitters in this comparison designed for simpler camera-adjacent placement. This matters if your installation involves a standardized industrial control cabinet with DIN-rail infrastructure, and matters less for a simple camera installation where a compact splitter mounted near the camera makes more practical sense. Match a splitter's physical mounting format to your actual installation context rather than assuming any splitter's form factor fits your specific deployment.
4 Best PoE Splitters in 2026
SICSOLINK Gigabit Active PoE Splitter, 48V to 12V

About this pick
This splitter's listing specifically states built-in overcurrent, short-circuit, overvoltage, and overpower protection through a premium chip, a genuinely comprehensive safety feature set at the lowest price in this comparison. Its full Gigabit 1000Mbps speed eliminates lag for smooth 4K surveillance video while converting 48V PoE to a stable 12V 2A output.
Compared to the IPCamPower and PoE Texas picks below, this one's specifically stated input voltage range from 44V to 57V with built-in overvoltage protection gives it real flexibility across slightly varying PoE source voltages.
Best for buyers who want comprehensive electrical protection and full Gigabit speed at the lowest price in this comparison.
Best for: buyers who want comprehensive electrical protection and full Gigabit speed at the lowest price
Check price on AmazonPros
- +Lowest price in this comparison at under $10
- +Comprehensive multi-safety protection built into the chip
- +Full Gigabit speed supports smooth 4K surveillance video
Cons
- โNo PoE pass-through, only converts to 12V DC output
- โCompact plastic housing, less rugged than the metal LINOVISION pick
IPCamPower Gigabit POE to 12V DC Converter with POE Pass Through

About this pick
This splitter's listing specifically describes a dual-function design that converts incoming PoE to a 12V DC output while also passing through a separate PoE output, letting you power both an IP camera and an additional 12V DC device like an IR illuminator or siren from a single cable run. Its PoE output also functions as a network extender, reaching an additional 328ft to a downstream PoE device.
Compared to the SICSOLINK pick above, this one's unique dual-output design accepts up to 30W of active PoE input and can share up to 27W between its PoE output and 12V DC output, a genuinely more versatile power-sharing architecture.
Best for buyers who need to power both a PoE camera and a separate 12V DC accessory from one cable.
Best for: buyers who need to power both a PoE camera and a separate 12V DC accessory from one cable
Check price on AmazonPros
- +Uniquely powers both a 12V device and a downstream PoE device simultaneously
- +PoE output doubles as a network extender for additional reach
- +Versatile for accessories like IR illuminators, sirens, and strobes
Cons
- โHighest price in this comparison at under $30
- โDesigned for indoor use only, unlike the outdoor-capable picks
PoE Texas 802.3af 12V PoE Splitter

About this pick
This splitter's listing specifically states compatibility with a named list of non-PoE devices including Arduino, Foscam, Wansview, Airsight, EasyN, Escam, Q-See, and Apexis cameras, a genuinely specific compatibility disclosure the other picks in this comparison don't provide. Its Mode A/B design works with any 802.3af PoE switch or 48V PoE injector to deliver 12 continuous watts.
Compared to the SICSOLINK and IPCamPower picks above, this one's direct phone support line (512 479 0317) alongside a 30-day no-questions-asked return policy gives buyers a genuinely accessible support channel beyond email or online tickets.
Best for buyers who want a specifically named compatible device list and direct phone support.
Best for: buyers who want a specifically named compatible device list and direct phone support
Check price on AmazonPros
- +Specifically named compatibility list removes guesswork
- +Direct phone support line for immediate help
- +30-day no-questions-asked return policy
Cons
- โLower 12W output than the SICSOLINK pick's 24W
- โNo PoE pass-through like the IPCamPower pick
LINOVISION Industrial 30W Gigabit PoE Splitter

About this pick
This splitter's listing specifically states a full metal design supporting both DIN-rail and wall-mount installation, a genuinely more industrial build than the plastic-housed picks in this comparison. Its selectable DC12V or DC24V output covers a broader range of non-PoE devices, and an optional passive PoE output mode specifically supports wireless APs and bridges.
Compared to the SICSOLINK, IPCamPower, and PoE Texas picks above, this one's 30W power delivery and dual voltage selection target industrial control cabinet and wireless bridge deployments needing more power and installation flexibility than a basic camera splitter.
Best for buyers who want an industrial metal build with selectable 12V/24V output and DIN-rail mounting.
Best for: buyers who want an industrial metal build with selectable 12V/24V output
Check price on AmazonPros
- +Full metal housing suits industrial control cabinet installations
- +Selectable 12V or 24V output covers more device types
- +DIN-rail mounting adds genuine installation flexibility
Cons
- โHighest price in this comparison at under $50
- โPassive PoE output mode is explicitly not recommended for regular devices
How We Evaluated These PoE Splitters
Each pick was assessed across 5 criteria weighted for real-world use.
Output voltage and amperage match
We checked that each splitter lists both voltage and current, because a 12V splitter rated at 1A cannot run a device that needs 2A, and a 12V unit on a 5V device can destroy it. The SICSOLINK's 12V at 2A and PoE Texas's 12W ceiling were the clearest. Read the amp number, not just the voltage.
Input standard versus PoE source
We read which standard each unit expects, 802.3af at roughly 13W for the device or 802.3at and above. A 24W or 30W splitter on an af-only switch simply never reaches its rated output, so we flagged the mismatch risk. Check your switch's standard before ordering a 24W unit.
Gigabit versus 100Mbps passthrough
We compared the data rate each splitter passes. SICSOLINK and IPCamPower run full Gigabit, enough for 4K surveillance, while cheaper units limit video bandwidth, so we weighted speed where a camera or access point is the load. Gigabit costs almost nothing extra at this tier.
Build, isolation and protection
We weighed housing and protection, from LINOVISION's all-metal DIN-rail body to SICSOLINK's overcurrent, short-circuit and overvoltage protection. A splitter is a fixed install, so a rugged shell matters more than a lower price in a cabinet. Plastic is fine on a shelf, metal in a cabinet.
Extras and support
We counted extras that change real use, such as IPCamPower's PoE pass-through that adds 328ft of reach and PoE Texas's phone support and 30-day return. These decide whether a splitter solves a problem or just converts power. Pass-through is the feature most buyers discover they needed too late.
How to Choose the Right PoE Splitters
By Device Power Draw
Add up what the device needs in watts before you pick a splitter.
| Your device | Recommended pick |
|---|---|
| A 12V camera or router that needs up to 2A and Gigabit speed | SICSOLINK Gigabit Active PoE Splitter, with 24W at 12V |
| A small 12V device that draws under 1A, like an Arduino board or a Wansview camera | PoE Texas 802.3af 12V PoE Splitter, with a 12W output and named compatibility list |
| A 12V camera plus a second PoE device down the line | IPCamPower Gigabit POE to 12V DC Converter, which has PoE pass-through |
| A 24V industrial sensor or a heavy 30W load | LINOVISION Industrial 30W Gigabit PoE Splitter, with selectable 12V or 24V output |
By Budget
These four range from single-digit pricing to the industrial tier.
| Budget | Recommended pick |
|---|---|
| The lowest price in this roundup, under $10 | SICSOLINK Gigabit Active PoE Splitter, which still delivers 24W and Gigabit |
| A bit more for phone support and a 30-day return | PoE Texas 802.3af 12V PoE Splitter, the value pick with live help |
| Up to the under $30 range for dual output | IPCamPower Gigabit POE to 12V DC Converter, the highest price after LINOVISION |
| The under $50 industrial tier for cabinet installs | LINOVISION Industrial 30W Gigabit PoE Splitter, with a metal housing |
Single Output vs Pass-Through
Whether you need to feed a second device decides the shape of splitter.
Single output (SICSOLINK, PoE Texas)
These convert PoE to one 12V connector. The wiring stays simple and the cost stays low, but the cable run ends at the splitter.
Pass-through (IPCamPower, LINOVISION)
IPCamPower supplies 12V and passes PoE along to a downstream device, extending reach by 328ft. LINOVISION offers an optional passive PoE output for access points and bridges.
Default to a single output unless a second PoE device sits farther down the same cable.
By Install Location
Where the splitter lives matters as much as what it powers.
| Install spot | Recommended pick |
|---|---|
| Indoors beside a camera or router on a shelf | SICSOLINK Gigabit Active PoE Splitter, in a compact plastic case |
| Inside an industrial control cabinet or on a DIN rail | LINOVISION Industrial 30W Gigabit PoE Splitter, with metal housing and DIN-rail mounting |
| An indoor accessory run for IR lights, sirens or strobes | IPCamPower Gigabit POE to 12V DC Converter, which is indoor use only |
| A desk project with a hobby board | PoE Texas 802.3af 12V PoE Splitter, with named Arduino compatibility |
For Security Camera Installs Specifically
Cameras fail in the field when the splitter cannot hold steady current.
Look for
A splitter whose amp rating exceeds the camera's draw, an input standard matching your switch, and Gigabit if the camera streams 4K.
In this comparison
SICSOLINK Gigabit Active PoE Splitter offers 12V at 2A with Gigabit speed at the lowest price, and LINOVISION covers 24V cameras.
When to Spend More
The extra money buys flexibility, not just power.
Spend more if
You need pass-through or selectable 12V/24V output, where IPCamPower and LINOVISION add features the budget picks lack.
Save if
You power one 12V device on a standard switch, where SICSOLINK under $10 delivers 24W and Gigabit.
Frequently Asked Questions
Can a PoE splitter power both a camera and a separate accessory like a light or siren?
Yes, with the right unit. IPCamPower's splitter outputs 12V DC and passes PoE through to a second device, and its listing mentions IR illuminators, sirens and strobes. Its input is up to 30W with 27W shared between the outputs, so add up both loads before choosing, because a siren plus a camera can exceed that.
What's the most common mistake buyers make when choosing a PoE splitter?
Assuming any PoE splitter provides pass-through or multi-device capability, when most splitters, including three of the four picks in this comparison, only provide a single DC output without any additional pass-through function.
Is the LINOVISION splitter worth the higher price over the SICSOLINK pick?
If you specifically need an industrial metal build with selectable 12V/24V output for a control cabinet or wireless bridge deployment, the LINOVISION's higher price is justified, but for a basic camera installation, the SICSOLINK pick delivers comparable core function for much less.
How do I know if a PoE splitter is compatible with my specific camera model?
Checking a listing's specifically named compatible device list, like the PoE Texas pick's list including Foscam, Wansview, and other named brands, or verifying your camera's exact voltage and connector requirements against the splitter's specifications, is the reliable way to confirm compatibility.
Can I extend my PoE network distance using a PoE splitter?
The IPCamPower pick specifically states its PoE pass-through output also functions as a network extender, reaching an additional 328ft to a downstream device, a dual-purpose capability the single-output splitters in this comparison don't offer.
Do I need a metal-housed splitter for an outdoor installation?
The LINOVISION pick's metal housing suits industrial and outdoor enclosure deployments, though checking a specific splitter's stated indoor/outdoor rating, like the IPCamPower pick's explicit indoor-only designation, is important before installing any splitter outdoors.
Bottom Line
best overall: SICSOLINK Gigabit Active PoE Splitter, 48V to 12V - best overall pick in this roundup.
See the full rankings above for all picks with pros, cons, and best-for summaries.
Browse on Amazon
All Prime-eligible options with current pricing.
Shop on Amazon โ