Amazon affiliate links - we earn a commission.Affiliate disclosure
Buying Guideยท9 min readยทUpdated September 2026

4 Best Gigabit PoE Splitters in 2026

We compared Gigabit PoE splitters by real wattage and voltage options, since one listing delivers 51W at your choice of 12V or 24V via a simple selector switch.

Quick note: We may earn a commission when you buy through Amazon links. This guide is based on product specs, buyer feedback, use cases, and comparison criteria, not paid placement. Affiliate disclosure.
DeskFinds desk setup with docking station
Amazon Prime

New to Amazon Prime?

Try Prime Free
Best Gigabit PoE Splitters

At a Glance

802.3bt Gigabit PoE++ Splitter to 12V/24V, 51W
Best High-Power

802.3bt Gigabit PoE++ Splitter to 12V/24V, 51W

โ†“ See why we picked it
Check price
Procet Gigabit PoE Splitter 12V/24V DC 25W
Best Industrial Build

Procet Gigabit PoE Splitter 12V/24V DC 25W

โ†“ See why we picked it
Check price
SICSOLINK 2-Pack Gigabit Active PoE Splitter
Best Value 2-Pack

SICSOLINK 2-Pack Gigabit Active PoE Splitter

โ†“ See why we picked it
Check price
Revotech Gigabit PoE Splitter 48V to 12V 2A
Best Single Unit

Revotech Gigabit PoE Splitter 48V to 12V 2A

โ†“ See why we picked it
Check price

A Gigabit PoE splitter maintains full 1000Mbps throughput while converting PoE to DC power, essential for a 4K camera or high-bandwidth device that would bottleneck on a 100Mbps splitter, but wattage and voltage flexibility still vary meaningfully across the Gigabit-rated tier.

We compared this lineup on real wattage output and voltage selectability, since one listing specifically offers a DIP switch to choose between 12V and 24V output, while another reaches 51W of power at either voltage for genuinely demanding devices.

5 Criteria to Look For Before Buying a Gigabit PoE Splitter

Key buying criteria so you get the right fit the first time.

A Selectable Voltage DIP Switch Lets One Splitter Serve Devices With Different Voltage Requirements

The 802.3bt pick and Procet pick both specifically include a voltage selector allowing either 12V or 24V output from the same physical unit, meaning you don't need to buy separate fixed-voltage splitters for devices with different voltage requirements. This matters if you're deploying the splitter across multiple device types with different voltage needs, or if you're not entirely certain of your specific device's exact voltage requirement, and matters less if you know you specifically need one fixed voltage and nothing else. Check whether a Gigabit splitter offers selectable voltage output if you need flexibility across multiple device types or voltage uncertainty.

Maximum Wattage at a Selected Voltage May Differ From the Splitter's Maximum Wattage at the Other Voltage Option

The Procet pick specifically states different maximum currents depending on which voltage you select (2.15A at 12V versus 1.05A at 24V), both landing at roughly the same 25W ceiling, while the 802.3bt pick specifically maintains a full 51W at either voltage selection, a real difference in how consistently wattage is delivered across voltage options. This matters if you're specifically choosing between the two voltage modes on the same splitter and want to know whether wattage stays constant, and matters less if you've already settled on one voltage and don't plan to switch. Check whether a selectable-voltage splitter maintains consistent maximum wattage across both voltage options, or if one option delivers meaningfully less power than the other.

A Metal Housing With a Named IP Rating Provides Different Durability Than a Compact Plastic Enclosure

The Procet pick's high-impact metal shell with an IP40 rating offers greater physical durability than the plastic housings on the SICSOLINK and Revotech picks, though IP40 specifically protects against solid objects rather than water, a real distinction from a higher water-resistance rating. This matters if physical durability against impact matters for your specific installation location, and matters less if you need genuine water resistance, where you'd want to verify a higher IP rating instead. Check both the housing material and the specific IP rating number if durability and environmental protection both matter for your installation.

A 2-Pack Bundle Delivers Real Per-Unit Savings Specifically When You Need to Convert Two Devices

The SICSOLINK 2-pack works out to a lower per-unit cost than buying two Revotech single units separately, a genuine value consideration if you have two devices needing PoE-to-12V conversion at Gigabit speed. This matters if you're specifically converting two devices at once, where the 2-pack delivers real savings, and matters less if you only have one device, where the single-unit Revotech pick avoids paying for an unused second unit. Count your actual number of devices needing conversion before choosing between a single-unit and 2-pack purchase.

Broad Named Device Compatibility Beyond Cameras Signals Genuine Versatility for Non-Camera PoE Deployments

The 802.3bt pick specifically names compatibility with LED strip lights, monitors, speakers, humidifiers, and oil diffusers alongside standard cameras and DVRs, a genuinely broader application range than a splitter marketed only for security camera use. This matters if you're using PoE to power non-camera devices like lighting or other electronics in a smart office or home setup, and matters less if your only use case is standard IP camera power conversion. Check a splitter's named compatible device list if your specific use case extends beyond standard camera or networking equipment.

4 Best Gigabit PoE Splitters in 2026

Best High-Power

802.3bt Gigabit PoE++ Splitter to 12V/24V, 51W

802.3bt Gigabit PoE++ Splitter to 12V/24V, 51W
12V/4.25A or 24V/2.12A, both up to 51WFull Gigabit 1000Mbps, IEEE 802.3bt/at/afIncludes DC terminal connector, DC cable, Cat5e cable

About this pick

This splitter's listing specifically states a voltage gear selector offering either 12V at up to 4.25A or 24V at up to 2.12A, both reaching a genuine 51W maximum power regardless of which voltage you select, the highest wattage in this comparison. Its full Gigabit 10/100/1000Mbps speed handles demanding high-bandwidth devices without bottlenecking.

Compared to the Procet pick below, this one's specifically named compatibility with PTZ cameras, DVRs, NVRs, LED strip lights, monitors, and even speakers, humidifiers, and oil diffusers shows genuinely broad application beyond just cameras.

Best for buyers who need the highest wattage in this comparison at either 12V or 24V for a demanding device.

Best for: buyers who need the highest wattage in this comparison at either 12V or 24V

Check price on Amazon

Pros

  • +Highest wattage in this comparison at 51W regardless of voltage selected
  • +Broad named compatibility across cameras, LED lights, and other devices
  • +Includes all necessary cables and connectors in the package

Cons

  • โˆ’Highest price in this comparison at under $50
  • โˆ’Requires an 802.3bt PoE++ source for full compatibility
Best Industrial Build

Procet Gigabit PoE Splitter 12V/24V DC 25W

Procet Gigabit PoE Splitter 12V/24V DC 25W
Selectable 12V/2.15A or 24V/1.05A, 25W maxMetal shell, IP40, 6KV surge protection-13F to 149F operating range (mode-dependent)

About this pick

This splitter's listing specifically states a high-impact metal shell with IP40 rating and 6KV surge protection, a genuinely rugged industrial build with an isolated internal design to avoid high current input damage. Its DIP switch selects between 12Vdc 2.15A max or 24Vdc 1.05A max output for different device requirements.

Compared to the 51W pick above, this one's metal housing and specifically stated wide operating temperature range from -13F to 149F (in 13W mode) target industrial and outdoor deployments prioritizing durability over maximum wattage.

Best for buyers who want a metal industrial housing with 6KV surge protection and selectable 12V/24V output.

Best for: buyers who want a metal industrial housing with 6KV surge protection and selectable output

Check price on Amazon

Pros

  • +Metal shell construction is more durable than plastic-housed splitters
  • +6KV surge protection is a concrete industrial-grade safeguard
  • +Selectable 12V/24V output via simple DIP switch

Cons

  • โˆ’Lower 25W maximum than the 51W pick above
  • โˆ’Higher price than the standard 12V Gigabit splitters in this comparison
Best Value 2-Pack

SICSOLINK 2-Pack Gigabit Active PoE Splitter

SICSOLINK 2-Pack Gigabit Active PoE Splitter
12V/2A (24W), 2-pack, full Gigabit 1000MbpsOvercurrent, short-circuit, overvoltage protection24-hour technical support response

About this pick

This splitter's listing specifically states a 2-pack bundle at 12V 2A (24W) output with full Gigabit speed, delivering genuine per-unit value for buyers converting two devices at once. Its built-in premium chip provides overcurrent, short-circuit, overvoltage, and overpower protection.

Compared to the Revotech pick below, this one's 2-pack format and 24-hour technical support response commitment give buyers both cost savings and a documented support timeline.

Best for buyers converting two 12V devices at once who want full Gigabit speed at a low per-unit price.

Best for: buyers converting two 12V devices at once who want full Gigabit speed at a low price

Check price on Amazon

Pros

  • +2-pack delivers strong per-unit value at full Gigabit speed
  • +Comprehensive multi-safety protection built into the chip
  • +24-hour technical support response commitment

Cons

  • โˆ’No selectable voltage like the Procet or 51W picks
  • โˆ’Compact plastic housing, less rugged than the Procet's metal shell
Best Single Unit

Revotech Gigabit PoE Splitter 48V to 12V 2A

Revotech Gigabit PoE Splitter 48V to 12V 2A
12V/2A (24W), 5.5x2.5mm connector, Gigabit speedAuto-detect appropriate power outputIsolation, short-circuit, overvoltage protection

About this pick

This splitter's listing specifically states auto-detection that provides appropriate power output to connected devices, up to a max 24W (12V/2A) via a 5.5x2.5mm connector, while maintaining full Gigabit speed at the lowest single-unit price in this comparison. Its multiple protection features include isolation circuit, short-circuit, and overvoltage protection.

Compared to the SICSOLINK 2-pack pick above, this one's single-unit format suits buyers who only need to convert one device without paying for a second unit they won't use.

Best for buyers who only need one Gigabit 12V splitter at the lowest price in this comparison.

Best for: buyers who only need one Gigabit 12V splitter at the lowest price

Check price on Amazon

Pros

  • +Lowest single-unit price in this comparison at under $15
  • +Full Gigabit speed at a budget-friendly price
  • +Multiple protection features safeguard connected equipment

Cons

  • โˆ’Single unit only, no multi-pack value like the SICSOLINK pick
  • โˆ’No selectable voltage or industrial housing like the pricier picks

How We Evaluated These Gigabit PoE Splitters

Each pick was assessed across 5 criteria weighted for real-world use.

Real output wattage

The headline matters less than the DC output. The 802.3bt splitter lists 51W at 12V or 24V, the Procet 25W, and the SICSOLINK and Revotech 24W at 12V/2A, and we compared those against typical loads like cameras, LED lights and small routers, because a 25W splitter on a 30W camera will brown out.

Voltage selection

Some devices need 24V, others 12V. The 802.3bt and Procet pick lists selectable 12V or 24V, while the SICSOLINK and Revotech fix 12V at 2A, so we checked whether the splitter matches the device's power input before comparing price, since a 12V device on a 24V output is destroyed instantly.

Gigabit speed and input standard

We checked that data passes at 1000Mbps and which input is needed. The 802.3bt model requires a PoE++ source for full compatibility, while the others take 802.3af/at, and we treated a stated speed and standard as a safeguard against a mismatch that would leave the camera dark with no error message.

Protection and housing

We compared protection: the Procet's metal shell with IP40 and 6KV surge protection, the SICSOLINK's overcurrent, short circuit and overvoltage protection, and the Revotech's isolation and short circuit protection. Metal and surge protection counted for outdoor or industrial use, where lightning and cabinet heat are the usual failures.

Value and support

The SICSOLINK 2-pack lowers the per-unit cost and lists 24 hour support, while the Revotech is the cheapest single unit. We asked whether a bundle or a single unit better fits a one-device install, since a spare splitter is useful only if you have a second device.

How to Choose the Right Gigabit PoE Splitters

By Output Wattage

The device's draw decides which splitter is big enough.

Your device drawRecommended pick
A PTZ camera, light bar or heavy device drawing up to 51W802.3bt Gigabit PoE++ Splitter to 12V/24V, 51W, the highest wattage here
A device drawing up to 25W at 12V or 24VProcet Gigabit PoE Splitter 12V/24V DC 25W, with selectable voltage
A 12V router or camera drawing up to 24WSICSOLINK 2-Pack Gigabit Active PoE Splitter, at 12V/2A
A single 12V device at the lowest costRevotech Gigabit PoE Splitter 48V to 12V 2A

By Budget

Prices range from under $15 to under $50.

Price tierRecommended pick
Under $15Revotech splitter, the cheapest single unit
Under $20, two unitsSICSOLINK 2-Pack, for two 12V devices
Under $40Procet splitter, with a metal shell and 6KV surge protection
Under $50The 802.3bt 51W splitter, with all cables included

Selectable Voltage vs Fixed 12V

The choice depends on how many different devices you power.

Selectable (802.3bt 51W, Procet)

A DIP switch picks 12V or 24V, so one model covers cameras and LED lights. Wattage can differ by voltage, and you must set the switch before connecting.

Fixed 12V (SICSOLINK, Revotech)

Simple, with nothing to misconfigure, and the cheapest. It only works with 12V devices, so check your device's label.

By Install Environment

Where the splitter lives affects housing needs.

Where it will sitRecommended pick
A dusty or industrial cabinetProcet, with a metal shell, IP40 and 6KV surge protection
A weatherproof box near a camera802.3bt 51W splitter, with a DC terminal connector for secure wiring
An office closet with a pair of 12V devicesSICSOLINK 2-Pack, with a plastic shell
A home network with one cameraRevotech, a small low-cost unit

For a Security Camera Install Specifically

Cameras need steady voltage and safe power.

Look for

A listed output wattage above the camera's draw, the right voltage, and overcurrent and short-circuit protection.

In this comparison

The Procet lists 25W at 12V and 24V with 6KV surge protection, and the SICSOLINK lists overcurrent, short-circuit and overvoltage protection.

When to Spend More

The splitters differ mostly in wattage and housing.

Spend more if

You power a high-draw device. The 802.3bt 51W splitter costs the most and delivers 51W at either voltage.

Save if

You run a 12V device under 24W. The Revotech and SICSOLINK cost far less with Gigabit speed and protection.

Frequently Asked Questions

Do I need a Gigabit-rated PoE splitter for a standard security camera?

Standard 1080p cameras work fine with a 100Mbps splitter, but a 4K camera or any device benefiting from higher bandwidth genuinely needs a Gigabit-rated splitter like the picks in this comparison to avoid bottlenecking.

What's the most common mistake buyers make when choosing a Gigabit PoE splitter?

Assuming a selectable-voltage splitter delivers the same maximum wattage regardless of which voltage you choose, when some splitters specifically show a wattage difference between their 12V and 24V modes.

Is the 51W splitter worth the higher price over the SICSOLINK 2-pack?

If you need higher wattage or 24V output for a demanding PTZ camera or LED installation, the 51W pick's higher price is justified, but for standard 12V cameras, the SICSOLINK 2-pack delivers full Gigabit performance at a much lower cost per unit.

Can I power an LED lighting installation with a Gigabit PoE splitter?

Yes, the 802.3bt pick in this comparison specifically names LED strip lights among its supported applications, delivering up to 51W of power suitable for lighting installations beyond typical camera use.

Does IP40 rating mean a splitter is waterproof for outdoor use?

No, IP40 specifically protects against solid objects but provides no water resistance rating, so the Procet pick's metal housing offers durability benefits but isn't specifically waterproof for direct outdoor rain exposure.

How do I know if I need 12V or 24V output for my device?

Checking your specific device's power specification label or documentation for its exact voltage requirement is the reliable way to confirm which output you need before choosing between a fixed-voltage or selectable-voltage splitter.

Bottom Line

best overall: 802.3bt Gigabit PoE++ Splitter to 12V/24V, 51W - best high-power pick in this roundup.

See the full rankings above for all picks with pros, cons, and best-for summaries.

Browse on Amazon

All Prime-eligible options with current pricing.

Shop on Amazon โ†’

Related Guides