7 Best PoE Network Switches in 2026
We compared PoE switches by real total power budget against realistic camera and access point counts, not just the advertised port maximum.

New to Amazon Prime?
Get fast, free shipping on every pick in this guide, plus Prime Video and exclusive deals.
Try Prime Free







At a Glance
PoE lets a single Ethernet cable carry both data and power to cameras, access points, and IP phones, eliminating a separate power run to each device. But the wattage printed on the box is a shared budget across every PoE port, not a guarantee that every port gets full power simultaneously.
We compared this cluster by total PoE budget against realistic device counts, since a switch that looks identical to a rival on port count can differ by 100+ watts in what it can actually power at once.
6 Criteria to Look For Before Buying a PoE Network Switch
Key buying criteria so you get the right fit the first time.
Port count is a headroom decision, not a current-need one
Port count is a headroom decision more than a current-need one, a poe network switches filled to capacity on day one forces a second switch and daisy-chaining later, adding latency and another failure point. Count realistic near-future devices, not just what's plugged in today. A little spare headroom now is cheaper than a second switch later.
PoE budget is a shared pool, not per-port
A switch rated for 8 PoE+ ports at a given total wattage does not mean every port gets its maximum share simultaneously, that total is a shared pool. Add up the real draw of every camera, AP, and phone you'll connect, and make sure the stated budget clears it with room to spare. Running the math after buying is how buyers discover underpowered ports the hard way.
Managed vs unmanaged changes what you can diagnose later
Unmanaged switches cost less and need no setup, but offer no diagnostic visibility if something misbehaves later. A managed option adds VLANs, port mirroring, and traffic monitoring, genuinely useful the first time you need to track down a problem device. Confirm which category a specific listing falls into before comparing on price alone.
Fanless does not always mean silent under load
Most desktop switches are genuinely fanless and silent, but high-port-count PoE switches sometimes add active cooling once the power budget climbs past 200-300W. Check for a fan explicitly in poe network switches's listing if a quiet office or bedroom install matters. A product photo alone won't reliably show whether active cooling is present.
Multi-gig speed needs matching cable and network gear
multi-gig speeds on this switch are a ceiling, not a guarantee, actual throughput depends on matching cabling (Cat5e minimum, Cat6a for 10G) and devices on both ends that support the faster standard. Dropping a multi-gig switch into an otherwise Gigabit network won't speed anything up. Verify your full chain, cable and endpoints, before expecting the rated speed.
Renewed enterprise gear needs a licensing check first
Cisco Meraki, Juniper, and some Aruba/HPE switches on Amazon, including poe network switches, are frequently sold as renewed hardware without an active license or support contract. Confirm what functions before assuming a discounted enterprise switch works like a new one out of the box. A license-gated feature set can make a renewed unit far less capable than its spec sheet implies.
7 Best PoE Network Switches in 2026
NETGEAR GS305P 5-Port PoE Gigabit Switch

About this pick
The GS305P packs 4 PoE+ ports into a 5-port Gigabit switch with a 63W total power budget and dynamic PoE allocation that redistributes unused wattage to whichever connected device needs it most, useful when running a mix of cameras and access points with different draw.
It stays fully unmanaged and fanless despite adding power delivery, keeping setup at true plug-and-play. The compact metal housing supports desktop or wall placement for tight installs near cameras or APs.
Best for: buyers prioritizing 5 ports, 4x poe+ at 63w total
Check price on AmazonPros
- +Dynamic power allocation avoids manual budgeting
- +Compact enough for tight camera/AP closets
- +Fanless despite PoE power delivery
Cons
- โ63W budget limits high-draw device counts
- โNo per-port PoE control since it's unmanaged
TP-Link TL-SG1005P 5-Port Gigabit PoE Switch

About this pick
TP-Link's TL-SG1005P delivers 4 PoE+ ports at up to 30W each with a 65W total budget alongside 1 non-PoE Gigabit port, plus Port-based QoS and IGMP Snooping for prioritizing camera or VoIP traffic.
The metal shielded-port case is built for the same desktop or wall-mount flexibility as TP-Link's non-PoE models, and it carries the identical 3-year warranty and free technical support.
Best for: buyers prioritizing 4x poe+ ports @65w total, 1 uplink
Check price on AmazonPros
- +65W budget covers most camera/AP deployments
- +QoS built in despite unmanaged design
- +Consistent 3-year warranty
Cons
- โOnly 1 non-PoE uplink port
- โNo per-port power monitoring
TP-Link LS108GP 8-Port PoE Gigabit Switch

About this pick
The LS108GP fits 8 full Gigabit PoE+ ports into a compact 5.16 x 7.72 x 4.76-inch metal case, with a 65W total PoE budget and an Extend Mode button that stretches PoE transmission distance up to 820 feet for spread-out camera deployments.
PoE Auto Recovery automatically reboots unresponsive PoE-powered devices without manual intervention, a real time-saver for unattended camera or AP installs. It stays fully fanless for silent operation in noise-sensitive spaces.
Best for: buyers prioritizing 8x poe+ ports @65w total
Check price on AmazonPros
- +820ft extend mode covers large properties
- +Auto-recovery reduces truck rolls for frozen cameras
- +Compact given the 8-port PoE count
Cons
- โExtend mode drops link speed to 10Mbps
- โ65W budget tight for 8 high-draw devices
NETGEAR GS308EP 8-Port PoE+ Smart Managed Switch

About this pick
The GS308EP steps up from purely unmanaged with an Easy Smart web interface offering VLANs, QoS, port monitoring, and per-port PoE controls across 8 PoE+ ports with a 62W total budget, plus uninterrupted PoE that keeps power flowing during a switch reboot.
It targets small businesses that need basic network segmentation without a full managed-switch learning curve. The fanless metal design and desktop/wall-mount flexibility carry over from NETGEAR's unmanaged line.
Best for: buyers prioritizing 8x poe+ ports @62w, easy smart managed
Check price on AmazonPros
- +Real VLAN/QoS management at a modest price
- +Uninterrupted PoE avoids camera drop during reboots
- +Per-port power control aids troubleshooting
Cons
- โ62W budget is modest for 8 PoE+ ports
- โWeb UI adds setup complexity vs pure unmanaged
UGREEN 10-Port PoE Switch (8x PoE+ @60W)

About this pick
UGREEN's 10-port switch pairs 8 PoE+ ports with 2 Gigabit uplinks and 60W of total PoE budget, with intelligent power management that cuts ports in priority order from 8 down to 1 if total draw exceeds the budget, rather than failing unpredictably.
A single button toggles between Standard, Port Isolation (VLAN), and Extend modes, the latter stretching PoE transmission up to 820 feet for security camera deployments. PoE Auto Recovery restarts unresponsive devices automatically in Extend mode.
Best for: buyers prioritizing 8x poe+ @60w + 2 uplinks
Check price on AmazonPros
- +Priority-order power cutoff avoids full outages
- +One-button mode switching covers 3 use cases
- +820ft extend range for large properties
Cons
- โ60W budget modest across 8 PoE ports
- โExtend mode reduces port speed to 10Mbps
Ubiquiti UniFi USW-Pro-24-PoE Layer 3 Switch

About this pick
The USW-Pro-24-PoE is a full Layer 3 managed switch with 24 Gigabit PoE ports and a substantial PoE budget, built to integrate with Ubiquiti's UniFi controller ecosystem for centralized management across an entire network.
As a Layer 3 switch it supports inter-VLAN routing and advanced traffic management well beyond what unmanaged or even basic smart-managed switches offer, positioning it for homelab and small-business deployments running a full UniFi stack.
Best for: buyers prioritizing 24-port layer 3 managed
Check price on AmazonPros
- +True Layer 3 routing, not just VLAN tagging
- +Deep UniFi ecosystem integration
- +Strong PoE budget for camera/AP fleets
Cons
- โRequires UniFi controller for full feature set
- โSteeper learning curve than smart-managed switches
Ubiquiti UniFi USW-Pro-48-PoE Layer 3 Switch

About this pick
Ubiquiti's 48-port Layer 3 PoE switch scales the Pro series up for larger deployments, in a rack-mount chassis weighing in at over 17 pounds, a genuine enterprise-density unit rather than a desktop switch stretched to 48 ports.
Like its 24-port sibling, it integrates with the UniFi controller for centralized VLAN, routing, and PoE management across a full site, making it a natural fit for growing offices or ambitious homelabs already on the UniFi platform.
Best for: buyers prioritizing 48-port layer 3 managed, poe
Check price on AmazonPros
- +Enterprise port density in one unit
- +Full Layer 3 routing support
- +Unified management alongside other UniFi gear
Cons
- โSignificant weight and rack space commitment
- โBest value only within an existing UniFi setup
How We Evaluated These PoE Network Switches
Each pick was assessed across 5 criteria weighted for real-world use.
Port Count & Speed Tier
Verified the actual port count, Gigabit vs multi-gig speed rating, and whether every port runs at the advertised speed or only some do, since several switches mix full-speed and lower-speed ports.
PoE Power Budget
Checked the total PoE wattage budget against realistic device counts, not just the per-port maximum, since a switch's total power pool is what actually limits how many cameras or access points it can run.
Management Depth
Classified each switch as unmanaged, smart/easy-managed, or fully managed Layer 2/3, since this determines what troubleshooting and segmentation options are available after installation, not just at setup.
Build & Mounting Flexibility
Weighed fanless vs active cooling, metal vs plastic housing, and desktop/wall/rack mounting options against the switch's likely install environment.
Real-World Documentation Honesty
Favored listings that clearly state cabling requirements, host port requirements, and speed caveats over ones that only advertise the theoretical maximum.
How to Choose the Right PoE Network Switches
Add Up Your Real PoE Draw First
A typical PoE security camera draws 6-12W, a WiFi access point 12-20W, an IP phone 5-7W. Multiply your actual device count by realistic draw before picking a switch on port count alone.
| Your PoE fleet | Best pick |
|---|---|
| 4-5 cameras or APs | NETGEAR GS305P or TP-Link TL-SG1005P |
| 8 cameras with headroom to grow | TP-Link LS108GP or NETGEAR GS308EP |
| Full 24-port office/camera deployment | Ubiquiti USW-Pro-24-PoE |
Extend Mode Trades Speed for Distance
Several switches in this list offer an Extend Mode that pushes PoE transmission up to 820 feet, useful for spread-out camera installs, but it drops the affected port's link speed to 10Mbps. Only enable it on ports where you genuinely need the extra distance.
By Budget
| Price range | Recommended pick |
|---|---|
| Under $40 | UGREEN 10-Port PoE Switch (8x PoE+ @60W) |
| Under $45 | NETGEAR GS305P 5-Port PoE Gigabit Switch |
| Under $45 | TP-Link TL-SG1005P 5-Port Gigabit PoE Switch |
| Under $60 | TP-Link LS108GP 8-Port PoE Gigabit Switch |
| Under $80 | NETGEAR GS308EP 8-Port PoE+ Smart Managed Switch |
| Under $750 | Ubiquiti UniFi USW-Pro-24-PoE Layer 3 Switch |
| Under $900 | Ubiquiti UniFi USW-Pro-48-PoE Layer 3 Switch |
When to Spend More
Spend more if
Ubiquiti UniFi USW-Pro-48-PoE Layer 3 Switch is aimed at buyers prioritizing 48-port layer 3 managed, poe.
Save if
UGREEN 10-Port PoE Switch (8x PoE+ @60W) is aimed at buyers prioritizing 8x poe+ @60w + 2 uplinks.
UGREEN 10-Port PoE Switch (8x PoE+ @60W) vs Ubiquiti UniFi USW-Pro-48-PoE Layer 3 Switch
UGREEN 10-Port PoE Switch (8x PoE+ @60W)
Aimed at buyers prioritizing 8x poe+ @60w + 2 uplinks.
Ubiquiti UniFi USW-Pro-48-PoE Layer 3 Switch
Aimed at buyers prioritizing 48-port layer 3 managed, poe.
Default to UGREEN 10-Port PoE Switch (8x PoE+ @60W) unless the pricier pick's specific advantage genuinely applies to your situation.
Matching a Pick to Your Primary Use Case
Look for
The specific capability your main use case actually depends on, stated explicitly in the listing, not implied by price or category alone.
In this comparison
NETGEAR GS305P 5-Port PoE Gigabit Switch is aimed at buyers prioritizing 5 ports, 4x poe+ at 63w total; TP-Link TL-SG1005P 5-Port Gigabit PoE Switch is aimed at buyers prioritizing 4x poe+ ports @65w total, 1 uplink.
Frequently Asked Questions
What happens if I plug too many PoE devices into one switch?
Most PoE switches with dynamic allocation will cut power to lower-priority ports (usually the highest-numbered ports first) rather than failing unpredictably. Check whether a switch documents this behavior before assuming it will gracefully handle an overloaded budget.
Do I need PoE+ or is standard PoE enough?
Standard PoE (802.3af) tops out around 15W per port, enough for basic cameras and phones. PoE+ (802.3at) delivers up to 30W per port, needed for PTZ cameras, higher-power access points, or devices with heaters/fans. Check your specific device's power draw before buying.
Out of everything compared here, which one should most buyers pick?
NETGEAR GS305P 5-Port PoE Gigabit Switch is aimed at buyers prioritizing 5 ports, 4x poe+ at 63w total.
Which pick offers the best value for a tight budget?
UGREEN 10-Port PoE Switch (8x PoE+ @60W) is aimed at buyers prioritizing 8x poe+ @60w + 2 uplinks, and at under $40 it's the lowest-cost pick in this comparison.
What's the price range across the picks in this comparison?
Prices here range from roughly $40 to $900, so match your choice to both your budget and actual needs rather than defaulting to either extreme.
Is the most expensive pick in this comparison worth the extra cost?
Ubiquiti UniFi USW-Pro-48-PoE Layer 3 Switch is aimed at buyers prioritizing 48-port layer 3 managed, poe. Whether that's worth the premium over the cheaper picks depends on whether that specific advantage matters for your use case.
Bottom Line
best overall: NETGEAR GS305P 5-Port PoE Gigabit Switch - best 5-port pick in this roundup.
See the full rankings above for all picks with pros, cons, and best-for summaries.
Browse on Amazon
All Prime-eligible options with current pricing.
Shop on Amazon โ