5 Best 5-Port PoE Network Switches in 2026
5-port PoE switches suit small camera or AP installs. We compared real power budgets and port speeds across the current compact PoE lineup.

New to Amazon Prime?
Get fast, free shipping on every pick in this guide, plus Prime Video and exclusive deals.
Try Prime Free





At a Glance
5-port PoE switches typically dedicate 4 ports to PoE output plus one uplink, right-sized for a small home security camera setup or extending WiFi with one or two additional access points without buying more capacity than needed.
We compared this cluster on total PoE budget and any distance-extension features, since 5-port PoE switches vary meaningfully in real power delivery despite near-identical port counts.
6 Criteria to Look For Before Buying a 5-Port PoE Network Switch
Key buying criteria so you get the right fit the first time.
Port count is a headroom decision, not a current-need one
Buy for what you'll plug in over the next 2-3 years, not just today. An 8-port switch that's already full the day it arrives means buying a second switch and daisy-chaining, which adds a hop of latency and another point of failure.
PoE budget is a shared pool, not per-port
A switch rated for 8 PoE+ ports at 120W total does not mean every port gets 30W simultaneously. Add up the real draw of every camera, AP, and phone you'll connect, and make sure the total budget clears it with room to spare.
Managed vs unmanaged changes what you can diagnose later
An unmanaged switch is zero-configuration but gives you no visibility when something goes wrong. A smart-managed switch adds VLANs, port mirroring, and traffic monitoring for a modest price increase, worth it the first time you need to isolate a misbehaving device.
Fanless does not always mean silent under load
Most desktop switches are genuinely fanless and silent, but high-port-count PoE switches sometimes add active cooling once the power budget climbs past 200-300W. Check for a fan explicitly if a quiet office or bedroom install matters.
Multi-gig speed needs matching cable and network gear
A 2.5G or 10G switch only delivers those speeds if your cabling is Cat5e or better (Cat6a for 10G) and the devices on both ends actually support that speed. Mixing a multi-gig switch into an all-Gigabit network gets you nothing extra.
Renewed enterprise gear needs a licensing check first
Cisco Meraki, Juniper, and some Aruba/HPE switches on Amazon are frequently sold as renewed hardware without an active license or support contract. Confirm what functions before assuming a discounted enterprise switch works like a new one out of the box.
5 Best 5-Port PoE Network Switches in 2026
NETGEAR GS305P 5-Port PoE Gigabit Switch

About this pick
The GS305P packs 4 PoE+ ports into a 5-port Gigabit switch with a 63W total power budget and dynamic PoE allocation that redistributes unused wattage to whichever connected device needs it most, useful when running a mix of cameras and access points with different draw.
It stays fully unmanaged and fanless despite adding power delivery, keeping setup at true plug-and-play. The compact metal housing supports desktop or wall placement for tight installs near cameras or APs.
Best for: buyers prioritizing 5 ports, 4x poe+ at 63w total
Check price on AmazonPros
- +Dynamic power allocation avoids manual budgeting
- +Compact enough for tight camera/AP closets
- +Fanless despite PoE power delivery
Cons
- โ63W budget limits high-draw device counts
- โNo per-port PoE control since it's unmanaged
TP-Link TL-SG1005P 5-Port Gigabit PoE Switch

About this pick
TP-Link's TL-SG1005P delivers 4 PoE+ ports at up to 30W each with a 65W total budget alongside 1 non-PoE Gigabit port, plus Port-based QoS and IGMP Snooping for prioritizing camera or VoIP traffic.
The metal shielded-port case is built for the same desktop or wall-mount flexibility as TP-Link's non-PoE models, and it carries the identical 3-year warranty and free technical support.
Best for: buyers prioritizing 4x poe+ ports @65w total, 1 uplink
Check price on AmazonPros
- +65W budget covers most camera/AP deployments
- +QoS built in despite unmanaged design
- +Consistent 3-year warranty
Cons
- โOnly 1 non-PoE uplink port
- โNo per-port power monitoring
TP-Link TL-SF1005P 5-Port Fast Ethernet PoE Switch

About this pick
The TL-SF1005P is a Fast Ethernet (10/100Mbps), not Gigabit, PoE switch with 4 PoE+ ports and a 67W combined budget, appropriate specifically for lower-bandwidth PoE devices like basic IP cameras or VoIP phones that don't need Gigabit speeds.
It shares the Extend Mode, Priority Mode, and Auto Recovery features of TP-Link's Gigabit PoE switches, just at Fast Ethernet speeds, making it a budget-appropriate choice when Gigabit throughput isn't the bottleneck.
Best for: buyers prioritizing 4x poe+ @67w total, fast ethernet
Check price on AmazonPros
- +Lower price appropriate for basic PoE camera/phone use
- +Extend and Priority modes carry over from Gigabit models
- +3-year warranty despite the lower price tier
Cons
- โFast Ethernet only, not Gigabit, a real bottleneck for modern devices
- โJust 4 PoE ports
YuanLey 5-Port Gigabit PoE Switch, 78W

About this pick
YuanLey's 5-port switch includes 4 Gigabit PoE ports with a 78W total budget and one-key VLAN isolation that separates all PoE ports from each other to prevent network storms, a genuinely useful security feature for a budget unmanaged switch.
It auto-detects PoE and non-PoE devices without configuration, and the compact durable metal design with bilateral heat dissipation keeps it running cool across security monitoring, office, or home network deployments.
Best for: buyers prioritizing 4x poe ports @78w total
Check price on AmazonPros
- +One-key VLAN isolation is unusual on an unmanaged switch
- +78W budget solid for 4 PoE ports
- +Auto-detects PoE vs non-PoE devices
Cons
- โBudget brand, shorter track record than TP-Link/NETGEAR
- โOnly 5 total ports
5-Port Industrial PoE DIN-Rail Switch, 30W/Port

About this pick
This industrial PoE switch delivers up to 30W per port under 802.3at across 5 Gigabit ports in an ultra-small 3.74 x 2.76 x 1.18-inch housing, with 12-48V DC redundant input for flexible power sourcing.
The industrial-grade aluminum housing handles -40 degreesC to 75 degreesC operation, and DIN-rail plus wall-mount hardware ships included for control cabinet installs.
Best for: buyers prioritizing 5x poe ports @30w/port, industrial
Check price on AmazonPros
- +30W per port supports higher-draw PoE devices
- +Wide temperature range suits industrial settings
- +Redundant DC power input
Cons
- โUltra-small size limits total PoE budget across all 5 ports
- โNiche industrial brand
How We Evaluated These 5-Port PoE Network Switches
Each pick was assessed across 5 criteria weighted for real-world use.
Port Count & Speed Tier
Verified the actual port count, Gigabit vs multi-gig speed rating, and whether every port runs at the advertised speed or only some do, since several switches mix full-speed and lower-speed ports.
PoE Power Budget
Checked the total PoE wattage budget against realistic device counts, not just the per-port maximum, since a switch's total power pool is what actually limits how many cameras or access points it can run.
Management Depth
Classified each switch as unmanaged, smart/easy-managed, or fully managed Layer 2/3, since this determines what troubleshooting and segmentation options are available after installation, not just at setup.
Build & Mounting Flexibility
Weighed fanless vs active cooling, metal vs plastic housing, and desktop/wall/rack mounting options against the switch's likely install environment.
Real-World Documentation Honesty
Favored listings that clearly state cabling requirements, host port requirements, and speed caveats over ones that only advertise the theoretical maximum.
How to Choose the Right 5-Port PoE Network Switches
By Use Case
| Use case | Best pick |
|---|---|
| 4-camera home security setup | NETGEAR GS305P (63W, dynamic allocation) |
| Basic IP cameras or VoIP phones, budget-conscious | TP-Link TL-SF1005P (Fast Ethernet) |
| Industrial control cabinet install | 5-Port Industrial PoE DIN-Rail Switch |
By Budget
| Price range | Recommended pick |
|---|---|
| Under $30 | YuanLey 5-Port Gigabit PoE Switch |
| Under $40 | TP-Link TL-SF1005P 5-Port Fast Ethernet PoE Switch |
| Under $45 | NETGEAR GS305P 5-Port PoE Gigabit Switch |
| Under $45 | TP-Link TL-SG1005P 5-Port Gigabit PoE Switch |
| Under $82 | 5-Port Industrial PoE DIN-Rail Switch |
YuanLey 5-Port Gigabit PoE Switch vs 5-Port Industrial PoE DIN-Rail Switch
YuanLey 5-Port Gigabit PoE Switch
YuanLey 5-Port Gigabit PoE Switch is aimed at buyers prioritizing 4x poe ports @78w total At under $30, it's the lowest-cost pick in this comparison.
5-Port Industrial PoE DIN-Rail Switch
5-Port Industrial PoE DIN-Rail Switch is aimed at buyers prioritizing 5x poe ports @30w/port, industrial At under $90, it sits at the higher end of this comparison's price range.
Most buyers should default to YuanLey 5-Port Gigabit PoE Switch unless best industrial din-rail specifically applies to your situation.
By Stated Strength
| What you want | Recommended pick |
|---|---|
| Best Overall, Dynamic Allocation | NETGEAR GS305P 5-Port PoE Gigabit Switch |
| Best Value | TP-Link TL-SG1005P 5-Port Gigabit PoE Switch |
| Best Budget Fast Ethernet | TP-Link TL-SF1005P 5-Port Fast Ethernet PoE Switch |
For A small PoE camera or access point install Specifically
Look for
A switch whose stated port count, speed, and power budget genuinely match a small PoE camera or access point install rather than a generic all-purpose listing.
In this comparison
NETGEAR GS305P 5-Port PoE Gigabit Switch is the strongest match for most buyers in this category, based on its stated feature set.
When to Spend More
Spend more if
5-Port Industrial PoE DIN-Rail Switch is aimed at buyers prioritizing 5x poe ports @30w/port, industrial
Save if
YuanLey 5-Port Gigabit PoE Switch is aimed at buyers prioritizing 4x poe ports @78w total
Frequently Asked Questions
Is 4 PoE ports enough for a small camera system?
Yes, for most single-room or small-property setups. If you're planning to expand past 4 cameras, consider an 8-port PoE switch from the start to avoid a near-term upgrade.
What's the real difference between the top pick and the budget option in this comparison?
YuanLey 5-Port Gigabit PoE Switch is aimed at buyers prioritizing 4x poe ports @78w total
Which pick in this comparison is best for the highest power or feature needs?
5-Port Industrial PoE DIN-Rail Switch is aimed at buyers prioritizing 5x poe ports @30w/port, industrial
Do I need a managed switch instead of one of these picks?
Only if you need VLAN segmentation, port mirroring, or other configurable network management features, an unmanaged switch is simpler and sufficient for most small network setups.
Can I mix PoE and non-PoE devices on the same switch?
Yes, PoE-capable switches auto-detect PoE devices and apply power accordingly, a non-PoE device connected to the same switch simply uses the port for data only.
How do I know if a switch has enough ports for future expansion?
Count your current devices plus any realistic near-term additions, then choose a switch with a small buffer rather than exactly matching your current device count.
Bottom Line
best overall: NETGEAR GS305P 5-Port PoE Gigabit Switch - best overall, dynamic allocation pick in this roundup.
See the full rankings above for all picks with pros, cons, and best-for summaries.
Browse on Amazon
All Prime-eligible options with current pricing.
Shop on Amazon โ